Call 08046065381 73% Response Rate

Send Email

REFRACTORY BRICK

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.

 

 

 

REFRACTORY BRICK - EDGE SKEW
  • REFRACTORY BRICK - EDGE SKEW
  • REFRACTORY BRICK - EDGE SKEW
  • REFRACTORY BRICK - EDGE SKEW
  • REFRACTORY BRICK - EDGE SKEW
  • REFRACTORY BRICK - EDGE SKEW
  • REFRACTORY BRICK - EDGE SKEW
  • REFRACTORY BRICK - EDGE SKEW

REFRACTORY BRICK - EDGE SKEW

Product Price: Rs 40 / NumberGet Best Price

Minimum Order Quantity: 1000 Number

Product Brochure

Product Details:
Size9 X 4.5 X 3 INCH
ColorDARK YELLOW
MaterialREFRACTORY
Cold Crushing Strength230 - 800 KG/SQ.CM
ShapeSKEWED
Aluminium Oxide30-60
Resistance DurabilityHeat Resistant, Fire Resistant
Eco-FriendlyYes
BrandPPW
Usage/ApplicationMEDIUM AND HIGH TEMPERATURE APPLICATION
Density1.90 - 2.75 G/CU.CM
Bulk Density2-2.5
ConditionNew
Alumina Percentage30%-90%
Ferric Oxide1%-5%
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 28 DAYS
  • Packaging Details: PALLETIZED PACKING
Get Best QuoteRequest A Callback
REFRACTORY BRICK - EDGE FEATHER
  • REFRACTORY BRICK - EDGE FEATHER
  • REFRACTORY BRICK - EDGE FEATHER
  • REFRACTORY BRICK - EDGE FEATHER
  • REFRACTORY BRICK - EDGE FEATHER
  • REFRACTORY BRICK - EDGE FEATHER
  • REFRACTORY BRICK - EDGE FEATHER
  • REFRACTORY BRICK - EDGE FEATHER
  • REFRACTORY BRICK - EDGE FEATHER
  • REFRACTORY BRICK - EDGE FEATHER
  • REFRACTORY BRICK - EDGE FEATHER

REFRACTORY BRICK - EDGE FEATHER

Product Price: Rs 50 / NOSGet Best Price

Minimum Order Quantity: 1000 NOS

Product Brochure

Product Details:
MaterialREFRACTORY
Cold Crushing Strength230-500
Resistance DurabilityFire Resistant, Heat Resistant
Aluminium Oxide30-70
Withstand Temps Up To1100-1700
Eco-FriendlyYes
Weight3.9 - 5.2 KG
Usage/ApplicationMEDIUM AND HIGH TEMPERATURE APPLICATION
ShapeFEATHER
BrandPPW
I deal inNew Only
Density1.90 - 2.75 G/CU.CM
Iron1.5-3
Apparent Porosity20 - 26
Bulk Density1.8 - 2.7
ConditionNew
Alumina Percentage30%-90%
Ferric Oxide1%-5%
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 28 DAYS
Get Best QuoteRequest A Callback
REFRACTORY BRICK - SIDE FEATHER
  • REFRACTORY BRICK - SIDE FEATHER
  • REFRACTORY BRICK - SIDE FEATHER
  • REFRACTORY BRICK - SIDE FEATHER
  • REFRACTORY BRICK - SIDE FEATHER
  • REFRACTORY BRICK - SIDE FEATHER
  • REFRACTORY BRICK - SIDE FEATHER
  • REFRACTORY BRICK - SIDE FEATHER
  • REFRACTORY BRICK - SIDE FEATHER
  • REFRACTORY BRICK - SIDE FEATHER

REFRACTORY BRICK - SIDE FEATHER

Product Price: Rs 50 / NOSGet Best Price

Minimum Order Quantity: 1000 NOS

Product Brochure

Product Details:
MaterialREFRACTORY
Cold Crushing Strength230-500
Resistance DurabilityHeat Resistant, Fire Resistant
Aluminium Oxide30-70
Withstand Temps Up To1100-1700
Weight3.9 - 5.2 KG
Usage/ApplicationMEDIUM AND HIGH TEMPERATURE APPLICATION
ShapeFEATHER
BrandPPW
I deal inNew Only
Density1.90 - 2.75 G/CU.CM
Apparent Porosity20-26
Bulk Density1.8-2.6
ConditionNew
Alumina Percentage30%-90%
Ferric Oxide1%-5%
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 28 DAYS
Get Best QuoteRequest A Callback
REFRACTROY BRICK - DOME
  • REFRACTROY BRICK - DOME
  • REFRACTROY BRICK - DOME
  • REFRACTROY BRICK - DOME
  • REFRACTROY BRICK - DOME
  • REFRACTROY BRICK - DOME
  • REFRACTROY BRICK - DOME
  • REFRACTROY BRICK - DOME
  • REFRACTROY BRICK - DOME
  • REFRACTROY BRICK - DOME
  • REFRACTROY BRICK - DOME

REFRACTROY BRICK - DOME

Get Latest Price

Product Brochure

Product Details:
MaterialREFRACTORY
Size9 X 4.5 X 3 INCH
ColorDARK YELLOW
Cold Crushing Strength230 - 800 KG/SQ.CM
Resistance DurabilityHeat Resistant, Fire Resistant
Usage/ApplicationMEDIUM AND HIGH TEMPERATURE APPLICATIONS
Weight3.9 - 5.2 KG
BrandPPW
Coverage Area40.5 SQ.INCH
Temperature1100-1700
Density1.90 - 2.75 G/CU.CM
Apparent Porosity20-25
Bulk Density2-2.6
ConditionNew
Alumina Percentage30%-90%
Ferric Oxide1%-5%
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 28 DAYS
Get Best QuoteRequest A Callback
REFRACTORY BRICK - BONDER
  • REFRACTORY BRICK - BONDER
  • REFRACTORY BRICK - BONDER
  • REFRACTORY BRICK - BONDER
  • REFRACTORY BRICK - BONDER
  • REFRACTORY BRICK - BONDER

REFRACTORY BRICK - BONDER

Get Latest Price

Product Brochure

Product Details:
SizeVARIES
MaterialREFRACTORY
Resistance DurabilityFire Resistant,Heat Resistant
ColorDARK YELLOW
Usage/ApplicationMODERATE AND HEAVY DUTY APPLICATIONS
ShapeBONDER
BrandPPW
Eco-FriendlyYes
Ferric Oxide1%-5%
Weight3.9 - 5.2 KG
Alumina Percentage30%-90%
Cold Crushing Strength230-600
Coverage Area40.5 SQ.INCH
Density1.90 - 2.75 G/CU.CM
Apparent Porosity21-25
Bulk Density1.9-2.7
ConditionNew
Country of OriginMade in India
A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes

Additional Information:

  • Delivery Time: 28 DAYS
Get Best QuoteRequest A Callback
REFRACTORY BRICK - END SKEW
  • REFRACTORY BRICK - END SKEW
  • REFRACTORY BRICK - END SKEW
  • REFRACTORY BRICK - END SKEW
  • REFRACTORY BRICK - END SKEW
  • REFRACTORY BRICK - END SKEW

REFRACTORY BRICK - END SKEW

Get Latest Price

Product Brochure

Product Details:
ColorDARK YELLOW
MaterialREFRACTORY
Resistance DurabilityFire Resistant, Heat Resistant
Aluminium Oxide30-60
ShapeSKEWED
Eco-FriendlyYes
BrandPPW
Ferric Oxide1%-5%
Weight3.9 - 5.2 KG
Usage/ApplicationMEDIUM AND HIGH TEMPERATURE APPLICATION
Alumina Percentage30%-90%
Cold Crushing Strength230 - 800 KG/SQ.CM
Density1.90 - 2.75 G/CU.CM
Bulk Density2-2.5
ConditionNew
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 28 DAYS
  • Packaging Details: PALLETIZED PACKING
Get Best QuoteRequest A Callback
REFRACTORY BRICK - CIRCLE BRICK
  • REFRACTORY BRICK - CIRCLE BRICK
  • REFRACTORY BRICK - CIRCLE BRICK
  • REFRACTORY BRICK - CIRCLE BRICK
  • REFRACTORY BRICK - CIRCLE BRICK
  • REFRACTORY BRICK - CIRCLE BRICK
  • REFRACTORY BRICK - CIRCLE BRICK
  • REFRACTORY BRICK - CIRCLE BRICK
  • REFRACTORY BRICK - CIRCLE BRICK
  • REFRACTORY BRICK - CIRCLE BRICK
  • REFRACTORY BRICK - CIRCLE BRICK

REFRACTORY BRICK - CIRCLE BRICK

Get Latest Price

Product Brochure

Product Details:
SizeALL
MaterialREFRACTORY
Resistance DurabilityFire Resistant, Heat Resistant
Usage/ApplicationMODERATE AND HEAVY HEAT DUTY APPLICATION
BrandPPW
Eco-FriendlyYes
Ferric Oxide1%-5%
Weight3.9-5.2
Alumina Percentage30%-90%
Cold Crushing Strength230 - 800 KG/SQ.CM
Coverage Area40.5 SQ.INCH
Porosity21-25
Density1.90 - 2.75 G/CU.CM
Bulk Density1.9-2.7
ConditionNew
Country of OriginMade in India
A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes

Additional Information:

  • Delivery Time: 28 DAYS
Get Best QuoteRequest A Callback
REFRACTORY BRICK - HOLLOW BRICK
  • REFRACTORY BRICK - HOLLOW BRICK
  • REFRACTORY BRICK - HOLLOW BRICK
  • REFRACTORY BRICK - HOLLOW BRICK
  • REFRACTORY BRICK - HOLLOW BRICK
  • REFRACTORY BRICK - HOLLOW BRICK
  • REFRACTORY BRICK - HOLLOW BRICK

REFRACTORY BRICK - HOLLOW BRICK

Get Latest Price

Product Brochure

Product Details:
MaterialREFRACTORY
Resistance DurabilityFire Resistant, Heat Resistant
ColorREDISH
Usage/ApplicationCONSTRUCTION
BrandPPW
ShapeCUBOID WITH HOLE
For Use inSide Walls

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.

Get Best QuoteRequest A Callback
REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK
  • REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK
  • REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK
  • REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK
  • REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK
  • REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK
  • REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK
  • REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK
  • REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK
  • REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK
  • REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK
  • REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK

REFRACTORY BRICK - BULL NOSE/HALF ROUND/JAMB BRICK

Get Latest Price

Product Brochure

Product Details:
SizeALL
MaterialREFRACTORY
Resistance DurabilityFire Resistant,Heat Resistant
ColorDARK YELLOW
Usage/ApplicationMODERATE AND HIGH HEAT DUTY APPLICATION
ShapeBULLNOSE
BrandPPW
Eco-FriendlyYes
Ferric Oxide1%-5%
Weight3.9 - 5.2 KG
Alumina Percentage30%-90%
Cold Crushing Strength230 - 800 KG/SQ.CM
Coverage Area40.5 SQ.INCH
Density1.90 - 2.75 G/CU.CM
Apparent Porosity20-25
Bulk Density2-2.5
ConditionNew
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 28 DAYS
Get Best QuoteRequest A Callback
REFRACTORY BRICK - SIDE SKEW
  • REFRACTORY BRICK - SIDE SKEW
  • REFRACTORY BRICK - SIDE SKEW
  • REFRACTORY BRICK - SIDE SKEW
  • REFRACTORY BRICK - SIDE SKEW
  • REFRACTORY BRICK - SIDE SKEW

REFRACTORY BRICK - SIDE SKEW

Get Latest Price

Product Brochure

Product Details:
Size9 X 4.5 X 3 INCH
ColorDARK YELLOW
MaterialREFRACTORY
ShapeSKEWED
BrandPPW
Ferric Oxide1%-5%
Weight3.9 - 5.2 KG
Usage/ApplicationMEDIUM AND HIGH TEMPERATURE APPLICATION
Alumina Percentage30%-90%
Cold Crushing Strength230 - 800 KG/SQ.CM
Density1.90 - 2.75 G/CU.CM
Bulk Density2-2.5
ConditionNew
Resistance DurabilityFire Resistant
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 28 DAYS
  • Packaging Details: PALLETIZED PACKING
Get Best QuoteRequest A Callback
REFRACTORY BRICK - END FEATHER
  • REFRACTORY BRICK - END FEATHER
  • REFRACTORY BRICK - END FEATHER
  • REFRACTORY BRICK - END FEATHER
  • REFRACTORY BRICK - END FEATHER
  • REFRACTORY BRICK - END FEATHER

REFRACTORY BRICK - END FEATHER

Get Latest Price

Product Brochure

Product Details:
MaterialREFRACTORY
Aluminium Oxide30-60
Resistance DurabilityHeat Resistant, Fire Resistant
Withstand Temps Up To1100-1700
Eco-FriendlyYes
Ferric Oxide1%-5%
Weight3.9 - 5.2 KG
Usage/ApplicationMEDIUM AND HIGH TEMPERATURE APPLICATION
Alumina Percentage30%-90%
Cold Crushing Strength230 - 800 KG/SQ.CM
ShapeFEATHER
BrandPPW
I deal inNew Only
Density1.90 - 2.75 G/CU.CM
ConditionNew
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 28 DAYS
Get Best QuoteRequest A Callback
REFRACTORY BRICK - BEVEL
  • REFRACTORY BRICK - BEVEL
  • REFRACTORY BRICK - BEVEL
  • REFRACTORY BRICK - BEVEL
  • REFRACTORY BRICK - BEVEL
  • REFRACTORY BRICK - BEVEL
  • REFRACTORY BRICK - BEVEL

REFRACTORY BRICK - BEVEL

Get Latest Price

Product Brochure

Product Details:
Size9 X 4.5 X 3 INCH
ColorDARK YELLOW
MaterialREFRACTORY
ShapeBEVEL
Aluminium Oxide30-60
Eco-FriendlyYes
Withstand Temps Up To1100-1700
Ferric Oxide1%-5%
BrandPPW
Weight3.9 - 5.2 KG
Chemical CompositionAL2O3,FE2O3
Usage/ApplicationMEDIUM AND HIGH TEMPERATURE APPLICATION
Alumina Percentage30%-90%
Cold Crushing Strength200-250
I deal inNew Only
Coverage Area40.5 SQ.INCH
Density1.90 - 2.75 G/CU.CM
Apparent Porosity20-25
Bulk Density2-2.5
ConditionNew
Resistance DurabilityFire Resistant
For Use inSide Walls
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 28 DAYS
Get Best QuoteRequest A Callback
REFRACTORY BRICK - STANDARD
  • REFRACTORY BRICK - STANDARD
  • REFRACTORY BRICK - STANDARD
  • REFRACTORY BRICK - STANDARD
  • REFRACTORY BRICK - STANDARD
  • REFRACTORY BRICK - STANDARD
  • REFRACTORY BRICK - STANDARD

REFRACTORY BRICK - STANDARD

Get Latest Price

Product Brochure

Product Details:
Usage/ApplicationSide Walls
MaterialREFRACTORY
Size9 X 4.5 X 3 INCH
ColorDARK YELLOW
ShapeCubical
Cold Crushing Strength230 - 800 KG/SQ.CM
Resistance DurabilityFire Resistant, Heat Resistant
Eco FriendlyYes
Weight3.9 - 5.2 KG
Coverage Area40.5 SQ.INCH
Density1.90 - 2.75 G/CU.CM
Alumina Percentage30%-90%
Ferric Oxide1%-5%
BRANDPPW
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 14 DAYS
  • Packaging Details: PALLETIZED PACKING
Get Best QuoteRequest A Callback
REFRACTORY BRICK - SIDE ARCH
  • REFRACTORY BRICK - SIDE ARCH
  • REFRACTORY BRICK - SIDE ARCH
  • REFRACTORY BRICK - SIDE ARCH
  • REFRACTORY BRICK - SIDE ARCH
  • REFRACTORY BRICK - SIDE ARCH

REFRACTORY BRICK - SIDE ARCH

Product Price: Rs 20 / NOSGet Best Price

Minimum Order Quantity: 1000 NOS

Product Brochure

Product Details:
MaterialREFRACTORY
Resistance DurabilityHeat Resistant, Fire Resistant
ColorDARK YELLOW
Size9 X 4.5 X 3/2.5, 2.75, 2, 1.5
ShapeARCH BRICK
Cold Crushing Strength230 - 800 KG/SQ.CM
Usage/ApplicationMEDIUM AND HIGH TEMPERATURE APPLICATIONS
BrandPPW
Bulk Density2-2.5
Alumina Percentage30%-90%
Ferric Oxide1%-5%
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 14 DAYS
  • Packaging Details: PALLETIZED PACKING
Get Best QuoteRequest A Callback
REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH
  • REFRACTORY BRICK - END ARCH

REFRACTORY BRICK - END ARCH

Product Price: Rs 20 / NOSGet Best Price

Minimum Order Quantity: 1000 NOS

Product Brochure

Product Details:
MaterialREFRACTORY
For Use inARCH WALL
Resistance DurabilityHeat Resistant, Fire Resistant
Size9 X 4.5 X 3/2.5
Cold Crushing Strength230 - 800 KG/SQ.CM
Usage/ApplicationMEDIUM AND HIGH TEMPERATURE APPLICATIONS
BrandPPW
Porosity22-25
Bulk Density1.9-2.7
Alumina Percentage30%-90%
Ferric Oxide1%-5%
Country of OriginMade in India
A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes

Additional Information:

  • Delivery Time: 14 DAYS
  • Packaging Details: PALLETIZED PACKING
Get Best QuoteRequest A Callback
REFRACTORY BRICK - CUPOLA
  • REFRACTORY BRICK - CUPOLA
  • REFRACTORY BRICK - CUPOLA
  • REFRACTORY BRICK - CUPOLA
  • REFRACTORY BRICK - CUPOLA
  • REFRACTORY BRICK - CUPOLA
  • REFRACTORY BRICK - CUPOLA

REFRACTORY BRICK - CUPOLA

Product Price: Rs 50 / NOSGet Best Price

Minimum Order Quantity: 1000 NOS

Product Brochure

Product Details:
MaterialREFRACTORY
ColorDARK YELLOW
Size9 X 4.5 X 3
ShapeCUPPOLA
For Use inPartition Walls, Side Walls, Roof
Cold Crushing Strength230 - 800 KG/SQ.CM
Usage/ApplicationSIDE WALL
Temperature1100-1700
Apparent Porosity20-25
Bulk Density2-2.5
Alumina Percentage30%-90%
Ferric Oxide1%-5%
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.




Additional Information:

  • Delivery Time: 28 DAYS
Get Best QuoteRequest A Callback
REFRACTORY BOTTOM POURING SET - MAIN CHANNEL
  • REFRACTORY BOTTOM POURING SET - MAIN CHANNEL
  • REFRACTORY BOTTOM POURING SET - MAIN CHANNEL
  • REFRACTORY BOTTOM POURING SET - MAIN CHANNEL
  • REFRACTORY BOTTOM POURING SET - MAIN CHANNEL
  • REFRACTORY BOTTOM POURING SET - MAIN CHANNEL

REFRACTORY BOTTOM POURING SET - MAIN CHANNEL

Product Price: Rs 250 / NumberGet Best Price

Minimum Order Quantity: 1000 Number

Product Brochure

Product Details:
MaterialREFRACTORY
Usage/ApplicationINGOT MAKING
ColorDARK YELLOW
Cold Crushing Strength230 - 800 KG/SQ.CM
Alumina Percentage30%-90%
Ferric Oxide1%-5%
Country of OriginMade in India

Bottom Pouring Set is a set of different refractory items like funnel, sleeve, centre brick, main channel brick, end channel brick, main connector brick and end connector brick. There are so many different size and grades are available.



Additional Information:

  • Delivery Time: 28 DAYS
Get Best QuoteRequest A Callback
HANGER AND SHOULDER BRICK
  • HANGER AND SHOULDER BRICK
  • HANGER AND SHOULDER BRICK
  • HANGER AND SHOULDER BRICK
  • HANGER AND SHOULDER BRICK
  • HANGER AND SHOULDER BRICK
  • HANGER AND SHOULDER BRICK
  • HANGER AND SHOULDER BRICK
  • HANGER AND SHOULDER BRICK

HANGER AND SHOULDER BRICK

Product Price: Rs 2,000 / NumberGet Best Price

Minimum Order Quantity: 1000 Number

Product Brochure

Product Details:
MaterialREFRACTORY
Usage/ApplicationFurnace
ColorDARK YELLOW
For Use inRoof
Cold Crushing Strength250-500
Packaging TypeLOOSE
Temperature1100-1700
Iron2-5
Apparent Porosity20-25
Bulk Density2-2.5
BrandPPW
Resistance DurabilityFire Resistant
Alumina Percentage30%-90%
Ferric Oxide1%-5%
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Delivery Time: 28 DAYS
Get Best QuoteRequest A Callback
HIGH ALUMINA REFRACTORY BRICK
  • HIGH ALUMINA REFRACTORY BRICK
  • HIGH ALUMINA REFRACTORY BRICK
  • HIGH ALUMINA REFRACTORY BRICK
  • HIGH ALUMINA REFRACTORY BRICK
  • HIGH ALUMINA REFRACTORY BRICK
  • HIGH ALUMINA REFRACTORY BRICK
  • HIGH ALUMINA REFRACTORY BRICK
  • HIGH ALUMINA REFRACTORY BRICK
  • HIGH ALUMINA REFRACTORY BRICK

HIGH ALUMINA REFRACTORY BRICK

Get Latest Price

Product Brochure

Product Details:
ColorDARK YELLOW
ShapeSQUARE
Resistance DurabilityFire Resistant, Heat Resistant
For Use inFloor, Partition Walls, Side Walls
Packaging TypePALETTE
Weight4-5
BrandPPW
Bulk Density2-2.5
MaterialREFRACTORY
Size9 X 4.5 X 3
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.

 

 



Additional Information:

  • Delivery Time: 14 DAYS
Get Best QuoteRequest A Callback
REFRACTORY BRICK - SPLIT
  • REFRACTORY BRICK - SPLIT
  • REFRACTORY BRICK - SPLIT
  • REFRACTORY BRICK - SPLIT
  • REFRACTORY BRICK - SPLIT
  • REFRACTORY BRICK - SPLIT
  • REFRACTORY BRICK - SPLIT
  • REFRACTORY BRICK - SPLIT

REFRACTORY BRICK - SPLIT

Get Latest Price

Product Brochure

Product Details:
ColorDARK YELLOW
Size1, 1.5, 2, 2.5
MaterialREFRACTORY
Resistance DurabilityFire Resistant, Heat Resistant
Aluminium Oxide30-60
Withstand Temps Up To1100-1700
Eco-FriendlyYes
Ferric Oxide1%-5%
BrandPPW
Usage/ApplicationINSULATION
Alumina Percentage30%-90%
Cold Crushing Strength230 - 800 KG/SQ.CM
For Use inSide Walls
Country of OriginMade in India

A fire brick, firebrick, or refractory brick is a block of refractory ceramic material used in lining furnaces, kilns, fireboxes, and fireplaces. A refractory brick is built primarily to withstand high temperature, but will also usually have a low thermal conductivity for greater energy efficiency. Usually dense firebricks are used in applications with extreme mechanical, chemical, or thermal stresses, such as the inside of a wood-fired kiln or a furnace, which is subject to abrasion from wood, fluxing from ash or slag, and high temperatures. In other, less harsh situations, such as in an electric or natural gas fired kiln, more porous bricks, commonly known as "kiln bricks" are a better choice. They are weaker, but they are much lighter, easier to form, and insulate far better than dense bricks. In any case, firebricks should not spall, and their strength should hold up well during rapid temperature changes.



Additional Information:

  • Packaging Details: PALLETIZED PACKING
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Pravin Pottery Works. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.